Waist trousers in durable polyamide material with panels with four-way stretch and high cotton content. Reinforcements in 100% Cordura material. Extended back end for better comfort. Two hanging pockets in Cordura material with a double bottom for extra durability and a zipper for smaller tools. Fly with YKK zipper. Bent knees. Back pockets. Belt buckles. Wide belt tunnels for extra strength and stability. Cordura-reinforced leg end. Hem at leg ends gives the opportunity for 5 cm extra leg length. Reinforcement in crotch. ID card slot under the thigh pocket lid. Knee protection pockets in Cordura material, accessible from the inside. Ruler pocket with double bottom in Cordura. Leg pocket with lid and space for accessories/tools. Pour with double velcro on both sides for hammer holder. The position of the knee pads can be adjusted 5 cm for better comfort. Metal buttons covered with plastic. Wash 40°C.
Materials: 93% polyamide, 7% elastane, weight 310 g/m². Secondary material 79% cotton, 21% polyester, weight 295 g/m². Reinforcement material 100% polyamide, weight 220 g/m².

Approved/Certified according to:
Bluesign

Highly effective cutting oil for ferrous and non-ferrous metals. Forms a strong layer that can withstand extremely high pressure. Increases tool and thread life. Effectively lubricates and cools. Allows higher cutting speed. Practical 360° spray valve for aerosols that works upside down.

Knee pads that provide a large contact surface with the floor. Vented through several holes. Can be washed with trousers, max 75°C.
Material: 100% porous rubber.

Approved/Certified according to:
EN 14404 Type 2, Level 1

Monteringshanske Black Diamond vinter, Øko-Tex 100-godkjent. Vinyl-/PVC-skumbelegg. Slitesterke med god bevegelighet og passform. Testet og godkjent for kalde forhold. Vinyl-/PVC-beleggingsteknologien en patentert prosess. Sanitized - behandlet for å hindre bakterievekst og for å fremme friskhet. Passer til monteringsarbeid og arbeid i våte, oljete og kalde omgivelser.

Godkjent/sertifisert i henhold til:
CE kategori 2
EN 420:2003
EN 511:2006
EN 388:2003
EN 388:2016
OEKO-TEX 100

Cut and split saw. Universal toothed. Tooth tip hardened, should not be filed.

Full face mask made of silicone that is easy to use and has a low weight. Equipped with i.a. a large polycarbonate visor, exhalation valve and speech membrane. Special glasses holder can be fitted. The mask has bayonet mounts and can be used partly with twin filters, partly with the 3M S-200 compressed air system or in the dual function with both filters and the S-200 system. Scratch-resistant polycarbonate visor where extra protective film is available. (6885 protective film).
Conforms to EN 136.

Fleksibilitet for å komme til på innvendige og utvendige konturer Allsidig til mange bruksområder, inkludert fjerning av sømmer, ujevnheter og kanter Kan brukes på alle metaller, inkludert stål, bløtt stål og eksotiske legeringer 3M™ 947D er et formbart bånd designet for å komme til på innvendige og utvendige konturer. Båndene våre kan brukes til å komme til på vanskelige steder for sliping, pussing og forming på alle metaller. Bruk det slangeformede 3M™ spiralbånd 947D til å komme til på innvendige og utvendige konturer, for sliping, pussing og forming på alle metaller. Våre allsidige, slangeformede 947D-bånd former seg etter konturer for å fjerne deleflater eller sømmer, defekter og kanter. De kan brukes på alle metaller, inkludert stål, bløtt stål og eksotiske legeringer.

Ørepropp HL Laserlite LL1

Svejsehjelm HJ-10 HB GF m/vipperude 60x110 mm & inderramme 64x101 mm. Glassfiber J B Olsen

Protective helmet made of impact-resistant ABS plastic. Designed for use in harsh environments and electrical isolation up to 1000 V. Soft rounded design that helps avoid the helmet getting caught in cables or branches. Good ventilation and good field of vision. Short screen that gives a better view upwards. Leather sweatband. Uvicator sensor disc that tells you when the helmet has been overexposed to UV radiation and needs to be replaced. Steering wheel adjustment for easy individual adaptation of the size. The helmet interior can be rotated 180° for better visibility when working in confined spaces. User temperature -30°C to +50°C.
Material: UV stabilized ABS.
Weight: 330 g.
Size : 53-62 cm.

Approved/Certified according to:
EN 397:2012+A1:2012 (industrial helmet standard)
EN 50365:2002 ( 1000 Vac)

Denne tapen er designet med en flat papirbakgrunn med syntetisk tape. Den gir god motstand mot løsemiddel og vann og er et godt underlag for maling Motstand mot limoverføring og stabilitet i sollys, god temperaturmotstand (100 °C). Den gir god malekantbeskyttelse, enkel håndtering, god beskyttelse mot avskalling av maling og kan fjernes uten limrester Bidrar til å hindre at maling siver gjennom Ekstra tynn maskeringstape 244 kommer med en gul jevn papirbakside og en 0,085 mm tykk syntetisk tape. Denne tapen har spesielt god UV-motstand og er vannfast. Den har god temperaturmotstand (100 °C). Denne tapen kan brukes til mange typer maskeringer, spesielt til bruksområder der UV-motstand og fjerning uten limrester er nødvendig og den optimale temperaturen er 100 °C i 30 minutter (båtbransjen)

Permanent lacquer marker with round tip 1-3 mm. For marking and decorating most materials such as paper, plastic, glass, metal, ceramics, porcelain, rubber and leather etc. Excellent for marking cables as well as dirty and oily plates. Good coverage. Waterproof, has lightfast ink and cannot be wiped off. Very suitable for outdoor use and withstands welding and washing. Heat resistant up to 300ºC. Corrosion resistant. Alcohol-based, free from xylol/toluene. The ink is fed forward by pushing in the tip, which then sucks up the ink. Replaceable tip.
Schneider is EMAS certified.

Wrench where the head is bent at a 15° angle and has a measuring scale. No protruding moving parts. Easy to work with in tight spaces. Industrial grade chrome vanadium steel.

Buffered eyewash proven to be more effective than saline for splashes from alkalis and acids. Eye shower which, together with the holder, ensures that it is possible to get help quickly. The bottle opens automatically when they are twisted out of the holders. The bottles are designed so that the eye is rinsed with an abundant flow for about 1.5 minutes, eye cup that guarantees an optimal flow. Buffered fluid increases the chance of saving the eyes. Acts to neutralize the eye's pH value, i.e. it has a neutralizing effect on splashes of alkalis and acids, which gives faster results than a normal saline solution. The effect is generally stronger on alkalis than acids. 4.5 year shelf life. The bottles cannot be reused. 2 bottles of 500 ml/frp.
Wall holder with illuminated instruction plate available as an accessory.

Antiflame kjeledress produsert i 350gr. Øko-Tex 100 metervare som er 99% bomull/1% AS Castor Xinke Protective. Antistatisk pyrovatexbehandlet materiale som er flammehemmende i hele plaggets levetid. Kjeledressen leveres med metallknapper og 50mm reflekser.

• CE kat. III
• EN ISO 11611, kl. 1 A1+A2
• EN ISO 11612, A1, A2, B1, C1, D0, E3, F1
• EN 1149-5
• Materialet er også sertifisert i.h.t. EC 61482-2 APC.1, (4kA) ATPV 9cal/cm2
• Farge: Marineblå med 50mm reflekser
• Materiale: 350gr, 99% bomull - 1% AS Castor Xinke Protective
• Metallknapper
• To brystlommer, to baklommer og to skråstilte sidelommer
• Knelommer
• Borrelåstetting i hals og ved håndledd
• Elastan innsydd i midjen for optmal passform
• Øko-Tex 100

Water-repellent, heat-resistant safety boot for extreme conditions. Upper in full-grain, impregnated Super8 leather that can withstand 900°C. Sewn with heat-resistant Kevlar thread that can withstand 425°C. PU abrasion protection on the toe. Lightweight aluminum toe cap. Reflex. Lining in airy mesh, durable, quick-drying Cambrelle in the heel. Binding sole with steel rail in the hollow foot for support and stability. Insole Ortholite X-40 Duo and gel cushion Energy Gel 2.0 in the heel. Soft metal-free nail tread protection. Oil- and heat-resistant outsole in Asymetrix Nitrile nitrile rubber. Antistatic. Very spacious last.

Approved/Certified according to:
EN ISO 20349-2:2017 (S3, SRC, HRO, HI, WG)

(HTML text not available)

Helmet with ventilating outer shell. The ventilation holes can be opened and closed using sliding shutters. Knobs on the sides adjust the position of the helmet on the head. Removable chinstrap that sits extra low on the neck thanks to a retractable headrest. The chinstrap is adjustable, which means that the helmet can be used both at high altitude and on the ground, as the user can choose between EN 397 and EN 12492 positions on the chinstrap. Can be equipped with headlamp, hearing protection and visor.
Materials: ABS (acrylonitrile butadiene styrene), nylon, polycarbonate, high-strength polyester, polyethylene.
Weight: 490 g.
Size: 53-63 cm.

Approved/Certified according to:
EN 397:2012+A1:2012 (industrial helmet standard)< br>EN 12492:2012 (climbing helmet standard)

Round neck sweater in a mixture of Lifa, with moisture-wicking properties, and merino wool. Designed for intense activity on cold days. No shoulder or side seams. Flatlock seams for best comfort. Wash 40°C.
Materials: 57% merino wool, 43% polypropylene, weight 215 g/m².

Cutting disc with precision-shaped ceramic pyramid-shaped grinding minerals. Using molecular bonding technology, sharp, angled structures have been designed that continuously crack to form sharp points. The clean and sharp edges make it easier for the cutting disc to cut faster, maintain a lower temperature and last much longer than conventional abrasive materials. Specially designed for use on stainless steel, mild steel and aircraft alloys. Provides up to 10% increased cutting speed and removes up to 3x more material compared to Cubitron II abrasives.
Type 41: Straight.

Hoodie with brushed inside. Front pocket, equipped with mobile phone pocket and hole for headphone cable. Contrast colored mesh fabric inside the hood. Ribbed cuffs at sleeve end and bottom. Flatlock seams tone-on-tone with the fabric. Wash 60°C.
Materials: 80% cotton, 20% polyester. Blue melange, green melange and anthracite gray melange: 60% cotton, 40% polyester. Gray melange: 85% cotton, 15% viscose, weight 300 g/m².

Approved/Certified according to:
OEKO-TEX 100

Water-repellent safety boot, mainly for outdoor use. Soft metal-free nail tread protection. Aluminum toe cap. Suitable for builders and gardeners and resistant to manure, grass and mud. Comfortable, without chafing seams. Boa lacing system that provides good grip and even pressure over the foot. Toe wear protection and secure protection that prevents the shoe from opening when struck against the foot. Upper in full-grain, impregnated leather. Durable Cordura. Lining in airy mesh, durable, quick-drying Cambrelle in the heel. Binding sole for stability at the rear and increased flexibility at the front, with steel rail in the arch for support and stability. Combination of Ortholite X-40 insole and gel cushion in the heel for maximum shock absorption, rebound and feeling of failure. SoftGrip with failing PU midsole and heat-resistant nitrile rubber outsole, which together provide a durable, hard-wearing functional sole with good grip. Very spacious read.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, WR)
IEC 61340-5-1 - ESD

Engangs-kjemikaliehansker i nitril Chemstar. Pudderfri. Testet og godkjent for ymse kjemikalier. Mikrotekstur for best mulig grep. Tåler fett, rensemidler osv. Passer til laboratorier, kjemisk industri, bilindustrien, mekanisk industri, lett monteringsarbeid, næringsmiddelindustri.

Godkjent/sertifisert i henhold til:
CE kategori 3
EN 420:2003
EN1186
EN 455
EN 374:2016

Marker pen with hard-wearing and durable tip in acrylic. Ideal for uneven surfaces such as concrete. Stays sharp and doesn't push into the pen under pressure. The cap is easy to take off and put on with one hand. Still works after 72 hours without cork. For use on concrete, wood, metal, plywood and plastic. Can be used on surfaces with oil, liquid or dirt. Dries quickly - reduces smearing on e.g. plastic.

Knee protector for placement in knee protector pocket. Temperature resistance -30°C - + 60°C. Contains neither heavy metals nor bromine products according to EN 340. The knee protector is of type 2 which meets the requirements of EN14404+A1:2010.
Materials: Polyolefin foam.

Monteringshansker EX i MacroSkin Pro med håndbak av Spandex. Med borrelås, ufôret. En robust arbeidshanske med forsterkning i håndflate og fingertupper. Myk og smidig ende i håndleddet laget av elastisk neopren. God pusteevne. Justerbar borrelås rundt håndleddet. Kan vaskes i maskin. Drypptørkes. Passer til grovt arbeid som f.eks. bruk i offshorenæringen, jernbindere og sagbruksarbeid.

Godkjent/sertifisert i henhold til:
CE kategori 2
EN 420:2003
EN 388:2003
EN 388:2016

Beskytter brukeren mot lett kontakt med stillestående objekter Gir industriell støtbeskyttelse i henhold til EN 812:A1 Lett mikrofiberstoff reduserer fuktigheten og gir mulighet for luftsirkulasjon Ventilasjon med netting i siden bidrar til bedre komfort Fleksibel skalldesign passer en rekke hodestørrelser Tilgjengelig i tre lengder: Standard (70 mm), Redusert (55 mm) og Mikro (25 mm) Tilgjengelig i en rekke farger Mulighet for brodert logo for de fleste produktene i serien 3M™ First Base™ 3 Bump Cap Classic i marineblått gir hodebeskyttelse i henhold til EN 812:A1 - baseballcapsdesign med redusert lengde (55 mm). Den er produsert i et lett mikrofiberstoff og har ventilasjon med netting i siden. Dette er kombinert med et fleksibelt, ergonomisk ABS-skall. 3M™ First Base™ 3 Bump Cap Classic i marineblått gir hodebeskyttelse i henhold til EN 812:A1. Bump capsen i baseballstil er produsert i et lett mikrofiberstoff for å redusere fuktigheten og gi mulighet for luftsirkulasjon. Ventilasjon med netting i siden bidrar også til bedre komfort. Et fleksibelt, patentert ABS-skall beskytter mot støt og mindre kuttskader og er ergonomisk utformet for bedre komfort. Utformingen gir bedre dekning for en rekke hodestørrelser, med redusert lengde (55 mm). Mulighet for brodert logo på de fleste produktene i serien er tilgjengelig, sammen med en rekke andre farger.

SKAFT

Adflo filter og filtertilbehør.

PP packing tape with a water-based acrylic adhesive. Closure of light goods, also recycled fiber. Silent and easy to unroll. Withstands sunlight.

Jobmaster elastisk og solid svart belte. 130 cm langt

Earmuff with Multipoint Bluetooth for connecting to mobile phones and streaming music with excellent sound quality. Multipoint technology allows you to pair two phones at the same time. Perfect when you need to be able to use both a work phone and a private phone, for example to use one mobile to stream music and receive calls on the other. Easy configuration and seamless connection. Automatic Bluetooth connection, after the first pairing, the hearing protection automatically connects to the last paired phone when the hearing protection is turned on. Level-dependent microphones with active listening function, communicate with your colleagues and hear warning signals and other important sounds without compromising your safety and hearing. Noise-reducing boom microphone enables clear communication even with loud background noise. Flexible arm that is easily moved to the side when not in use. Rubber coated push buttons, easy to find even with gloves. Supports voice control through Apple SIRI and Google Assistant. Activate the function and control music playback or phone calls with your voice. Wideband Audio technology or HD Voice, which improves the phone's sound quality (provided your mobile operator supports the feature). Built-in rechargeable Li-Ion battery. The batteries are charged quickly with the included USB charging cable. Connect to a USB source or use your mobile wall charger. 3-hour charging gives up to 80 hours of battery life. Power saving function for longer battery life, automatically turns off the device after a period of inactivity. Tested and approved to IPX4, which means that the hearing protection can be used in heavy rain. Attenuation value SNR 29 dB.
Conforms to EN 352-1:2002.

Safety glasses made of polycarbonate. Mounts easily in protective helmets from 3M. Can be adjusted to a tight fit against the face that provides excellent protection against particles and dust. Durable lens coating protects against both mechanical and chemical damage. Unique design that allows the glasses to be easily inserted between the helmet shell and the interior. Fits 3M safety helmets G500, G22, G2000, G3000, G3501, H700, 5000 SecureFit and X5500 SecureFit.

Approved/Certified according to:
EN 166:2001

Brass padlock with hardened steel shackle. Size 15-60 mm with double-jointed stirrup.
HB = High stirrup.

Cable reel with 4 230 V sockets. Fixed center that prevents inserted connection cables from spinning when rolling out or in the cable on the ceiling. Pipe stand and drum in impact-resistant Polyamide. Self-closing lid. With fitted rubber cable. Overheat protection. 16 A/230 V.
Max load refers to rolled-in/out.
Approved for outdoor use. IP44.

Cup-shaped filtering half-mask with exhalation valve. M-shaped nose bridge. Color-coded cotton bands. Protects against dust, solid and liquid particles in concentrations up to 10 x the hygienic limit value.
Conforms to EN 149:2001.