Sleek, durable artisan pants in 4-way stretch with a water-repellent finish and a slimmer fit. Cordura-reinforced, extra-wide nail pockets equipped with tool hooks, tool compartment and additional zippered pockets. Insert pockets. Cordura-reinforced back pockets with bellows, one with lid. Leg pocket with bellows and flap with velcro closure and an internal phone pocket in mesh. Leg pocket with zipper. Cordura-reinforced ruler pocket with knife holder and pen pocket. Knife holder with button. Two hatches on the sides with button for hammer holder. D-ring in the waistband. Removable ID card pocket. Fly with plastic zip. Metal buttons. Wide panels at the back and sides. Inner leg seam with 2-needle knitting. Knee protection pockets reinforced with Cordura stretch. Mesh panel in the knee folds. Leg ends with Cordura reinforcement. 70 mm wide cut reflexes around the legs, reflex detail on the leg pockets. Wash 40°C.
Material: 94% polyester, 6% elastane, weight 320 g/m².

Approved/Certified according to:
EN ISO 20471 class 1
EN 14404 - together with Blåkläder knee protectors 4027, 4057, 4058 and 4032

Ergonomic measuring tape with locking button and belt holder. Measuring tape with yellow scale in mm, with black and red text. Rubber-coated hook with magnet, which makes the hook easier to hook and grip different types of materials, it firmly attaches to shiny and curved surfaces (which is impossible for metal hooks). The magnets on the hook stick well to different types of steel materials. The hook is self-adjusting to ensure accuracy when measuring internal and external dimensions, (when measuring external dimensions with a magnet, 3mm must be added to get the correct final result). 
Type approved according to EU Class II .

Long underwear in a mixture of Lifa, with moisture-wicking properties, and merino wool. Designed for intense activity on cold days. Elastic waist and crotch reinforcement. Flatlock seams for best comfort. Wash 40°C.
Materials: 57% merino wool, 43% polypropylene, weight 215 g/m².

JanusPro® Antiflame Extra Multibeskyttende ullundertøy laget i 68 % merinoull, 30 % Modakryl og 2 % antistatfiber. Kombinasjonen av disse tre fibrene sørger for at plaggene har en evigvarende, innebygget flammehemmende effekt, uten bruk av kjemikalier. Kolleksjonen er CE-merket og sertifisert i henhold til EN ISO 11612:2015 flammehemmende tekstiler, EN 1149-5:2018 beskyttelse mot statisk elektrisitet og IEC 61482-2:2018 APC 1 lysbue, box-test(heldekkende plagg). Metervaren er kaloritestet med følgende verdi: ELIM=6,1/Ebt=7,3 cal/m2.

JanusPro® Antiflame Extra Multibeskyttende ullundertøy laget i 68 % merinoull, 30 % Modakryl og 2 % antistatfiber. Kombinasjonen av disse tre fibrene sørger for at plaggene har en evigvarende, innebygget flammehemmende effekt, uten bruk av kjemikalier. Kolleksjonen er CE-merket og sertifisert i henhold til EN ISO 11612:2015 flammehemmende tekstiler, EN 1149-5:2018 beskyttelse mot statisk elektrisitet og IEC 61482-2:2018 APC 1 lysbue, box-test(heldekkende plagg). Metervaren er kaloritestet med følgende verdi: ELIM=6,1/Ebt=7,3 cal/m2.

Permanent universal markers for plastic, glass, metal, etc. Odorless Cap-off ink without Toluene and Xylene. Dries quickly. The hood has a practical clip. UV resistant.
Round tip width 1.0 mm.

Filter clean air

Jobmaster gul/svart ekstra lang regnjakke. Jakken er laget i PU/PVC belagt på en strikket polyester base, noe som gir en utrolig god fleksibilitet og brukerkomfort. Innlagt stor hette i krage, fleecebelagt hals og neopren puls/ribb i armer. Glidelås av plast i front med stomklaff med trykknapper over. Plagget er olje og syrebestandig, og leveres med standard 50 mm 3M Scotchlite reflekser.

• Farge: Gul/svart
• Varselklasse 2
• Vekt: 320 gr/m2
• EN 340, EN 343, EN ISO 14116, EN ISO 20471

Hub washer for steel, stainless steel and cast iron. Long service life. Iron, sulfur and chlorine free.
Type 27: Recessed hub.

Øyedusjflaske som inneholder en steril natriumklorid 0,9 % løsning.

SPIKERFORKLE-BELTER ETC

Breaking strength 300 kg.

Light and bright headlamp. Focusable from far to wide light. Many mounting options thanks to the metal clip on the outside of the lamp. Rubberized inside of the headband.
Light flux: 20 / 200 lumens.
Range: 40 / 130 m.
Burning time: 35 / 4.5 h.
Enclosure class: IP54.
Battery type: 1 pc 1.5 V AA battery (included).
Weight including batteries: 92 g.

Earmuff with helmet attachment. Hearing protection for use against high noise levels in a wide range of industries. Slim design. Fits many protective helmets without the need for an additional adapter. Soft, wide sealing rings reduce pressure around the ears and improve comfort and durability. Dual molded lightweight hoods. Large space inside the covers minimize moisture and heat build-up. Easy to click in and out, makes it easy to move the covers on and off the ears. Made of a non-conductive (di-electric) material. The metal components of the jumper and bracket are completely encapsulated in this non-conductive material. Attenuation value SNR 32 dB.
Conforms to EN 352-3.

Helmet glove with flannel lining.

Impact-resistant plastic handle that fits in the hand. The finger guard has been developed to optimize safety. The blades have a good balance between length and width, which gives the user a better experience during use. The blade is made of high-quality carbon steel that is easy to resharpen. Carbon steel can be affected by moisture and corrosive environments, so get into the habit of wiping the knife and oiling the blade after use. Belt clip with smart button locking that makes it easy to mount or remove the knife sheath on the buttons of the work clothes. Shield with the dala weapon allows you to connect multiple sheaths. The knife sits securely in the knife sheath with an attachment that locks the handle with a click.
Blade thickness: 2 mm

Charger and battery pack with 2 18 V 5.0 Ah Li-Ion batteries and charger. The charger is suitable for both the M12 and M18 series.

Cleaning wipes specially developed to clean fog-free and scratch-resistant lenses. Make the glasses clean and fog free. Silicone free.

Cutting disc with precision-shaped ceramic pyramid-shaped grinding minerals. Using molecular bonding technology, sharp, angled structures have been designed that continuously crack to form sharp points. The clean and sharp edges make it easier for the cutting disc to cut faster, maintain a lower temperature and last much longer than conventional abrasive materials. Specially designed for use on stainless steel, mild steel and aircraft alloys. Provides up to 10% increased cutting speed and removes up to 3x more material compared to Cubitron II abrasives.
Type 41: Straight.

Cable ties made of Nylon 66 (UL-approved polyamide 6.6, 94V-2). Black UV resistant. The grooves on the inside of the band make the cable tie lock and provide a good grip on cables and pipe bundles. The design of the head guarantees a high tensile strength, while allowing a very low insertion force. Ambient temperature: -40°C - +85°C.
Tested and approved according to: RoHS, UL62275, GL, CE EN-62275:2009 (=IEC62275:2006,modified).

T-shirt in pre-shrunk combed cotton and ringspun yarn. Double collar with elastane. Wash 60°C.
Materials: 100% cotton with the exception of these colors; Anthracite 60% cotton and 40% polyester, Gray melange in 85% cotton and 15% viscose, Ash in 99% cotton and 1% viscose, Neon yellow and neon orange 80% Polyester and 20% cotton with side seam, weight 160 g/m².

Approved/Certified according to:
OEKO-TEX 100

Strong fabric tape with polyethylene-treated fabric backing and rubber adhesive. Easy to tear off by hand. For general industrial applications, sealing and moisture protection. Thickness 0.22 mm. Withstand temperatures up to 93°C for one hour.

Monteringshansker EX i MacroSkin Pro med håndbak av Spandex. Med borrelås, ufôret. En robust arbeidshanske med forsterkning i håndflate og fingertupper. Myk og smidig ende i håndleddet laget av elastisk neopren. God pusteevne. Justerbar borrelås rundt håndleddet. Kan vaskes i maskin. Drypptørkes. Passer til grovt arbeid som f.eks. bruk i offshorenæringen, jernbindere og sagbruksarbeid.

Godkjent/sertifisert i henhold til:
CE kategori 2
EN 420:2003
EN 388:2003
EN 388:2016

Ørepropp HL Laserlite LL1

Adflo filter og filtertilbehør.

SVEISEGLASS 60X110

2-ply toilet paper made of recycled fiber with an embossed pattern. One roll corresponds to 5-6 normal-sized rolls. Suitable for toilets with medium to high visitor volume. Suitable holder Tork Dispenser Mini Jumbo Toilet paper, T2.

Approved/Certified according to:
EU Ecolabel
FSC

Folding welding goggles with tightness degree DIN 5. Lightweight basket goggles with 6 valves and hardened lenses Ø 50 mm.

Approved/Certified according to:
EN 175 

Especially suitable for felling in carbon steel. With precision-shaped ceramic grinding minerals with extremely sharp and fast-cutting edges. The discs cut cold and last longer through structured mineral breakdown. Gives higher productivity, faster felling, increased service life and requires lower pressure.
Used together with washer plate.

Solide sveisehansker med overside i oksespalt og underside i oksenarv med lang levetid. Designet med forsterkning av tommelens baseområde. Sydd med sterk, varmebestandig kevlar-tråd. Helfôret med bommullsfleece. Egnet for variert sveising i stål, aluminium og andre metaller.
Tykkelse: 1,2-1,4 mm.
Lengde: 35 cm.

Godkjent/sertifisert i henhold til:
EN 12477:2001 Type A
EN 388:2016+A1:2018 2132X
EN 407:2004 412142
EN 420:2003+A1:2009

Avløpsåpner

Pre-filter which is intended to capture coarse particles and thereby extend the life of the particle filters SR 510 P3 R and SR 710 P3 R, combination filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The pre-filter is placed in the pre-filter holder which is then snapped onto the particle filter or combination filter.

Earmuff with headband. Wide, soft head pillow for best comfort even during long periods of wear. Has been developed for use in extremely noisy environments. A double shell minimizes resonances in the fairing shell. The high-frequency attenuation is maximal, while it is still easy to perceive speech and signals. An acoustic coupling between the inner volume and the volume between the shell in turn provides maximum low-frequency attenuation. The sealing rings are wide and filled with soft foam plastic for the best fit and low contact pressure. Attenuation value SNR 35 dB.
Conforms to EN 352-3.

En tettsittende, pustende og smidig arbeidshanske. Med optimal passform, brukerkomfort og slitestyrke. Høy fingerfølsomhet og med et svært godt grep selv på oljete og våte flater gjør denne hansken til en favoritt. Utmerket til teknisk og mekanisk arbeid. Halvdyppet med nitrilfoam. CE kat. II EN 388, 4131

Adhesive and sealing compound that hardens quickly. Very easy to apply. Remains elastic after curing. Can be painted over with most existing water-based paints. Good color stability. Good weather resistance and good UV resistance. Also adheres to damp surfaces. For gluing panels, profiles and other common building materials such as wood, MDF and chipboard. Approved for mirror bonding. Contains no isocyanates, halogens, silicones or solvents.

Waist trousers in durable polyamide material with panels with four-way stretch and high cotton content. Reinforcements in 100% Cordura material. Extended back end for better comfort. Two hanging pockets in Cordura material with a double bottom for extra durability and a zipper for smaller tools. Fly with YKK zipper. Bent knees. Back pockets. Belt buckles. Wide belt tunnels for extra strength and stability. Cordura-reinforced leg end. Hem at leg ends gives the opportunity for 5 cm extra leg length. Reinforcement in crotch. ID card slot under the thigh pocket lid. Knee protection pockets in Cordura material, accessible from the inside. Ruler pocket with double bottom in Cordura. Leg pocket with lid and space for accessories/tools. Pour with double velcro on both sides for hammer holder. The position of the knee pads can be adjusted 5 cm for better comfort. Metal buttons covered with plastic. Wash 40°C.
Materials: 93% polyamide, 7% elastane, weight 310 g/m². Secondary material 79% cotton, 21% polyester, weight 295 g/m². Reinforcement material 100% polyamide, weight 220 g/m².

Approved/Certified according to:
Bluesign

LASTESURRING