Hammere, Huggmeisler, Dorer, Smiverktøy

Blasted and clear lacquered, hand forged with hardened pen and striking surface. Tubular shaft with an ergonomically designed and knurled handle.

Drive mandrels for driving out e.g. locking pins and rivets. Can also be used for punching holes in thin sheet metal.

I lakkert kobberfarget vanadiumstål med spesialherdet slagende. Flat form.
DIN 6453.

Made of solid, black rubber. Normal hardness. Wooden handle.

Oval bracket. Of hickory or ash. Without wedge. The dimensions of the eye are directly adapted for "Hultafors" hammers and chisel hammers.

Varnished, copper-colored vanadium steel with specially hardened impact end. Octagonal shape.
DIN 7250.

Contains three nail drivers and two drivers. Matt chrome-plated chrome-molybdenum steel. Holder in plastic.
Nail driver: 2, 3, 4 mm
Driver: 2 and 4 mm

Made of high-quality pure bar copper. Fiberglass shaft.

Blasted and clear lacquered. With round impact and crushed bullet. Hickory shaft.

Chisel hammer with convex partially hardened striking surfaces. Handle of ash wood with a patterned surface and matt protective varnish. Shaft attachment with double cross wedge and epoxy.
DIN 6475. GS certificate.

Blasted and clear lacquered. Hickory shaft.

Blasted and clear lacquered. Oval tubular steel shaft, covered with perforated rubber handle.

Blasted and clear lacquered. With round stroke and long pen. Ash/hickory shaft.

For normal work in impact-sensitive materials where you want to avoid impact marks in materials such as copper, lead, brass, rubber or wood. Blue hammer heads made of an artificial material of cellulose butyrates and with rounded surfaces.
Handle of noble wood. Resistant to oil, grease and petrol.
3625NL = Loose impact surfaces, supplied as a pair.

Bounce-free mallet with soft hitting surfaces. Full cast urethane construction. The handle is welded to the top of the head and has a waffle pattern. The handle end can also be used as a striking surface. Spark-free because the steel structure is completely embedded in hot-pressed urethane. Recoil damping thanks to hundreds of steel balls that move inside the head and absorb the energy on impact.

Mallet with head covered in urethane and a recoilless function. The skull is filled with steel balls that dampen the impact and reduce the recoil. The soft urethane layer is gentle on the workpiece. Ergonomically designed handle in Santoprene for optimal grip. Flat surface of the skull enables upright storage.

Bounce-free sledgehammer with soft striking surfaces. Full cast urethane construction. Flat surface on the top of the head also enables storage in an upright position. The handle is welded to the top of the head with a waffle pattern. The handle end can also be used as a striking surface. Spark-free because the steel structure is completely embedded in hot-pressed urethane. The urethane coating also helps to reduce the noise level. Recoil damping thanks to hundreds of steel balls that move inside the head and absorb the energy on impact.

Bounce-free hammer with steel impact head, filled with finely divided steel particles. Replaceable nylon punches (punches are driven on). Rubber handle.

Sfix. Trident wedges. Steel.

Round wedges. Made of steel for hammer handles, mallet handles and ax handles.

Forged knuckles with hardened square punches at both ends. Hickory shaft.

Straight hickory shaft with oval mount and drilled hanging hole. The shafts are dipped in linseed oil which protects against moisture and provides a good grip.
Supplied with steel wedge and shaft instructions.

Extra thin chisel made of inductively hardened special steel. Flat. Lacquered shaft. Polished tip.

Forged from special steel. Hickory shaft.

Forge sledgehammer made of black lacquered forge, with hardened square punches at both ends. Hickory wooden handle.

SNEKKERHAMMER

Claw hammer with highly polished steel shaft and easy-to-grip, shock-absorbing handle. Octagonal neck and round head. The shaft can withstand a bending force of 150 kg on the -16 and -20 oz models in normal use.
Weight oz = without shaft
Weight g = with shaft

Traditional carpenter's hammer with curved claw. Grip-friendly rubberized handle for a good grip. Hammer made of carbon steel with a handle made of TPR/PP material.
Weight oz = without handle
Weight g = with handle

Carpenter's hammer with straight claw, nail puller on the side and magnetic nail holder for one-handed work. Grip-friendly rubberized handle for a good grip. Hammer made of carbon steel with a handle made of TPR/PP material.
Weight oz = without handle
Weight g = with handle

With nylon/vinyl grip and fully forged shaft.
Weight oz = without shaft
Weight g = with shaft

Helstøpt snekkerhammer. Med nylon/vinylgrep. Med rett klo.

Ergonomically designed hammer, forged in one piece for increased durability with vibration dampening urethane plug. Thin strong enema that makes it easier to access without leaving marks. The opening and angle of the cup gives the best possible grip on the nail. Ergonomically designed handle with clear end stop provides a secure grip and is available in two sizes, Large and X-Large.
Weight oz = without handle
Weight g = with handle

Lakkert, kobberfarget vanadiumstål med spesialherdet slagende. 8-kantet form. 
DIN 6450. Form C.

Forged hammer with a square punch at one end and straight pen at the other. Both hardened. Fiberglass shaft with rubber insert.

Workshop / pen hammer with carbon steel head and fiberglass handle with TPR.