Beskytter brukeren mot lett kontakt med stillestående objekter Gir industriell støtbeskyttelse i henhold til EN 812:A1 Lett mikrofiberstoff reduserer fuktigheten og gir mulighet for luftsirkulasjon Ventilasjon med netting i siden bidrar til bedre komfort Fleksibel skalldesign passer en rekke hodestørrelser Tilgjengelig i tre lengder: Standard (70 mm), Redusert (55 mm) og Mikro (25 mm) Tilgjengelig i en rekke farger Mulighet for brodert logo for de fleste produktene i serien 3M™ First Base™ 3 Bump Cap Classic i marineblått gir hodebeskyttelse i henhold til EN 812:A1 - baseballcapsdesign med redusert lengde (55 mm). Den er produsert i et lett mikrofiberstoff og har ventilasjon med netting i siden. Dette er kombinert med et fleksibelt, ergonomisk ABS-skall. 3M™ First Base™ 3 Bump Cap Classic i marineblått gir hodebeskyttelse i henhold til EN 812:A1. Bump capsen i baseballstil er produsert i et lett mikrofiberstoff for å redusere fuktigheten og gi mulighet for luftsirkulasjon. Ventilasjon med netting i siden bidrar også til bedre komfort. Et fleksibelt, patentert ABS-skall beskytter mot støt og mindre kuttskader og er ergonomisk utformet for bedre komfort. Utformingen gir bedre dekning for en rekke hodestørrelser, med redusert lengde (55 mm). Mulighet for brodert logo på de fleste produktene i serien er tilgjengelig, sammen med en rekke andre farger.

PAPPBEGER

Assembly glove made of nylon with nitrile foam coating. Durable glove with good dexterity. Tight-fitting, comfortable and flexible. Suitable for light to medium-heavy work in assembly, transport, maintenance, industry, plant and warehouse.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003+A1:2009
EN 388:2016+A1:2018 3121X

Antiflame kjeledress produsert i 350gr. Øko-Tex 100 metervare som er 99% bomull - 1% AS Castor Xinke Protective. Antistatisk pyrovatexbehandlet materiale som er flammehemmende i hele plaggets levetid. Kjeledressen leveres med YKK glidelås og 50mm reflekser.

Jobmaster verneskolett med spikerbeskyttelse. Vår budsjettskolett i fullnarvet okselær. Ekstra tåforsterkning, cambrelle innerfôr, og gummisåle. Et billig alternativ, men med god brukerkomfort. Str. 38-47 Stål tåbeskytter Stål spikerbeskyttelse Forsterket utvendig med PU over tå Produsert i.h.t. EN ISO 20345:2004, S3, SRC

Chain lighting with LEDs mounted in two rows. Durable and flexible, which means that the lighting can be attached in most places by suspension, wrapped around construction scaffolding or suspended from the ceiling. Useful on construction site or workshop. Can be connected with several units max 50m. Suitable for use in temperatures between -20°C to +50°C.
Supplied with 5 m cable with IP44 plug.
Power: 9.6 W/m.
Colour temperature: 6500K.
Enclosure class: IP44.

GLASSRENS

Ear cover for mounting on a safety helmet. Equipped with noise-reduced microphone, Bluetooth technology and microphones for listening function. Bluetooth version 4.2, for connection to an external device for hands-free calls and streaming. Battery life of up to 78 hours. Push To Listen function, the volume of the Bluetooth-connected device is reduced and the possibility of hearing ambient sounds is increased. Large buttons and voice-controlled menus for easy handling. Easy connection to phone. The 3M Connected Equipment application makes it possible to navigate via the app in the headset's menu and make all configurations in a simple and fast way. The app also offers quick access to user instructions, FAQs and technical data sheets. The app is downloaded to the phone from the App Store or Google Play. The cover's functions can also be controlled from the cover's buttons. Exchangeable covers in different colors are available as accessories. Attenuation value SNR 30 dB. Supplied with 2 x 1.5 V AA batteries, can also be used with rechargeable batteries.
Conforms to EN 352-3:2002

Engangshansker i Nitril, pudderfri. Hansken er tettsittende og har mikrotekstur for best mulig grep. Testet og godkjent for ulike kjemikalier. Tåler fett, rensemidler osv. Passer til direkte kontakt med alle typer næringsmidler og medisinsk bruk etc.

Godkjent/sertifisert i henhold til:
CE kategori 3
EN 420:2003
EN 1186
EN 455
EN 374:2016

Avløpsåpner

Cut protection glove with Typhoon lining with sandy nitrile coating. Very good dexterity, suitable for precision work. High tear strength, resistant to puncture and abrasion. Seamless, close-fitting model that fits comfortably and breathes. Can be used when working with a touch screen. Reinforced tumbas. Good oil and dry grip. Protects against contact heat up to 100°C for 15 seconds. Cut protection level D.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003 + A1:2009
EN 388 :2016+A1:2018 4X43D
EN 407:2004 X1XXXX

Lamellar disc with abrasive Zircon/Aluminium oxide. For stainless steel and aluminium. Fiberglass support plate. Extra long service life.
Type 27A: Angled.

4-edged hammer drill with SDS-Plus attachment. Solid HM tip with precise centering on hard and smooth surfaces. Four symmetrical 90° cutting edges guarantee round holes and reduce the risk of jamming when drilling in rebar. Large inlet channels ensure optimal removal of the drilling dust. Four symmetrical input channels provide low vibrations and ensure low and even track wear. Suitable for brick, concrete, reinforced concrete and natural stone.
Diameter Ø 18 mm > carbide tip.
Drill with working length 400-940 mm: Pre-drill with a shorter drill of the same diameter.

FILLER

Wrench where the head is bent at a 15° angle and has a measuring scale. No protruding moving parts. Easy to work with in tight spaces. Industrial grade chrome vanadium steel.

Brass padlock with hardened steel shackle. Size 15-60 mm with double-jointed stirrup.
HB = High stirrup.

FEIEBRETT

Assembly glove made of nylon with vinyl/PVC foam coating. Very durable. Fit and mobility that provide good dexterity. Sanitized to prevent bacterial growth and give a fresh feeling. Vinyl foam coating with encapsulated air molecules provides very good wet and oil grip. The coating also provides a certain shock-absorbing effect when handling hard materials. The upper hand is water and oil repellent. Suitable for light to medium-heavy work in assembly, transport, maintenance, industry, plant and warehouse.

Approved/Certified according to:
CE category 2
OEKO-TEX 100
EN 420:2003+A1:2009
EN 388:2016 3131X

Allrengjøring

Waist trousers in durable polyamide material with panels with four-way stretch and high cotton content. Reinforcements in 100% Cordura material. Extended back end for better comfort. Two hanging pockets in Cordura material with a double bottom for extra durability and a zipper for smaller tools. Fly with YKK zipper. Bent knees. Back pockets. Belt buckles. Wide belt tunnels for extra strength and stability. Cordura-reinforced leg end. Hem at leg ends gives the opportunity for 5 cm extra leg length. Reinforcement in crotch. ID card slot under the thigh pocket lid. Knee protection pockets in Cordura material, accessible from the inside. Ruler pocket with double bottom in Cordura. Leg pocket with lid and space for accessories/tools. Pour with double velcro on both sides for hammer holder. The position of the knee pads can be adjusted 5 cm for better comfort. Metal buttons covered with plastic. Wash 40°C.
Materials: 93% polyamide, 7% elastane, weight 310 g/m². Secondary material 79% cotton, 21% polyester, weight 295 g/m². Reinforcement material 100% polyamide, weight 220 g/m².

Approved/Certified according to:
Bluesign

Depth marker for professionals. Longlife pen for marking in deep holes. With 2.8 mm thick graphite pin as standard. The tip is 45 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pen. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is easily fed forward with a click feed via the stainless steel tube. Robust sleeve equipped with belt clip for easy storage in trousers or tool pocket. Pencil sharpener in the sleeve positioned for easy access, the sleeve does not need to be removed from the belt or pocket to sharpen the pencil. Supplied as standard with a graphite pencil.
Reserve pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking on wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

Impregnated cleaning wipes with an ethanol base. With the help of the napkins, unhardened joint compound is easily wiped away from work surfaces, tools and hands.

Ribbestrikket og rund hals. Forsterket skulder- og nakkesøm.
Materiale: 100% bomull, enkel jersey. Vekt:180 g/m².

A fully lined heating glove in durable cowhide with heat-resistant Kevlar wire. Good fit with elastic seam over the wrist. 10 cm long collar. Suitable for welding.

Approved/Certified according to:
CE category 3
EN 420:2003+A1:2009
EN 388:2016 3143X
EN 12477:2001+A1:2005 Type A
EN 407:2004 41314X
EN 1149-2:1997

Malerrull stikk velour-filt etterlater en fin finish på glatte underlag. Best til oljebasert maling og lakk. Til alle typer maling/beis, også epoxy, 2-komp., rustbeskyttelse, polyester m.m.

Corrugated stainless steel wire (A2). For removing burrs, rust, slag, scale, paint, excess rubber, combustion residues and other impurities in hard-to-reach places. For stainless material and aluminium. The brushes are used in high-speed air and electric hand machines.

Filtering half mask for welding fumes, with valve. Effective particle filter provides an FFP2-rated (NPF 12) protection against dust, fog and metal fumes. Layers of activated carbon filter out ozone gas generated during MIG, TIG and ARC welding. Specially treated outer shell provides improved flame resistance to minimize the impact of hot weld spatter. Cool Flow valve provides comfortable protection even in hot and humid conditions. Soft inner sealing ring provides increased comfort, which can be cleaned so the cover can be used multiple times. Cup-shaped design that keeps its shape and adapts well to the shape and size of the face. Adjustable braided headband that provides high comfort to the face, head and neck. Low profile design for use with welding shields and welding helmets. Rated for multiple use.

Thermojakke i skogsmodell. Jakken har tommelgrep på ermene og forlenget ryggparti som holder på varmen. Enveisglidelås i plast.
Materiale: 100% polyester, pile. Vekt: 370 g/m².

Round neck sweater in a mixture of Lifa, with moisture-wicking properties, and merino wool. Designed for intense activity on cold days. No shoulder or side seams. Flatlock seams for best comfort. Wash 40°C.
Materials: 57% merino wool, 43% polypropylene, weight 215 g/m².

(HTML text not available)

Bi-metal tiger saw blade with 8% cobalt for optimized performance. Standard mount. Slim blade body optimized for maximum flexibility and speed. For efficient sawing in metals, steel, stainless steel and aluminium.
* = Adapted for figure sawing.

Bit set with 1/4" bit holder containing 32 parts. Supplied in a practical plastic box with belt clip.
Material bits: S2
Length: 25 mm

Vår innleggsåle Mega Comfort er produsert i patentert 100% HD Memory Foam. Noe som gir optimal dempning og suveren brukerkomfort. Sålen består av to lag, og er spesiallaget for bruk i verne-/yrkesskosko, men fungerer også optimalt i fritidssko. Inneholder antibaktrielle stoffer som motvirker vond fotlukt og svette. Maksimal komfort og støtdemping Patentert 100% dobbeltlags minneskum Ergonomisk designet Soft Contoured Arch Support for balanse, komfort og demping Sølv-ion antimikrobiell teknologi Anti-bakteriell, anti-svette og -lukt Temperaturregulerende luftehull Maskinvaskbar Hva er HD Memory Foam? Unikt materiale og cellestruktur forskjellig fra vanlig skum Sammensatt av milliarder av minneceller med høy tetthet Temperatur- og trykkfølsom Flyter jevnt for å følge kroppens naturlige kurve

SOKKER 30050 HELÅRS

Kraftig kniv som er godt egnet for kutting og legging av tepper og gulvbelegg. Ekstra lang bladføring for for kutting av varierende tykkelser. Skruefeste m/skrallefunksjon for sikring av blad. Forlengelse av håndtak for tilpasning mot vegg og åpning av malingsspann etc. Ergonomisk grep. Enkelt verktøyfritt bladbytte. Formontert avbrytbart blad. 18 mm bryteblad.

Durable, light waist trousers in artisan model, made in four-way stretch. Removable double bottomed hanging pockets in stretch Cordura with nylon tool handles. Thigh pocket with YKK zipper. Ruler pocket with Cordura reinforcement in stretch. Loop for ID card. Rubberized metal buttons. Wide belt channel at the back. Branch wedge. Pre-bent knees with reinforcement in stretch Cordura. Knee pad pockets accessible from the inside. The knee protector position can be adjusted 5 cm. Option to increase leg length by 5 cm + 3 cm. Stretch-Cordura at leg ends. Reflective details. Wash 60°C.
Materials: 94% polyamide, 6% elastane, weight 244 g/m². Reinforcements 97% polyamide, 3% elastane, weight 307 g/m².

Approved/Certified according to:
Bluesign