Merkeverktøy

Marker pen with hard-wearing and durable tip in acrylic. Ideal for uneven surfaces such as concrete. Stays sharp and doesn't push into the pen under pressure. The cap is easy to take off and put on with one hand. Still works after 72 hours without cork. For use on concrete, wood, metal, plywood and plastic. Can be used on surfaces with oil, liquid or dirt. Dries quickly - reduces smearing on e.g. plastic.

Permanent universal markers for plastic, glass, metal, etc. Odorless Cap-off ink without Toluene and Xylene. Dries quickly. The hood has a practical clip. UV resistant.
Round tip width 1.0 mm.

Permanent lacquer marker with round tip 1-3 mm. For marking and decorating most materials such as paper, plastic, glass, metal, ceramics, porcelain, rubber and leather etc. Excellent for marking cables as well as dirty and oily plates. Good coverage. Waterproof, has lightfast ink and cannot be wiped off. Very suitable for outdoor use and withstands welding and washing. Heat resistant up to 300ºC. Corrosion resistant. Alcohol-based, free from xylol/toluene. The ink is fed forward by pushing in the tip, which then sucks up the ink. Replaceable tip.
Schneider is EMAS certified.

Permanent marker with round tip 1-3 mm. Very suitable for marking on cardboard, paper, plastic, glass, wood and metal etc. The pen body is made of environmentally friendly pp plastic. The hood has a practical clip that sits well in the pocket. Quick-drying ink that is water-resistant and fade-resistant. Odorless without the addition of Tuluol and Xylol. Cap-off ink, can be uncapped for days without drying. Refillable with Refillstation 640.
Schneider is EMAS certified.

Depth marker for professionals. Longlife pen for marking in deep holes. With 2.8 mm thick graphite pin as standard. The tip is 45 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pen. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is easily fed forward with a click feed via the stainless steel tube. Robust sleeve equipped with belt clip for easy storage in trousers or tool pocket. Pencil sharpener in the sleeve positioned for easy access, the sleeve does not need to be removed from the belt or pocket to sharpen the pencil. Supplied as standard with a graphite pencil.
Reserve pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking on wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

RISSENÅL

For marking on glowing steel materials and other metals. Workpieces stored in the open and reheated can be marked with these chalks. The writing is not obliterated by fire or water. Withstands heat up to 2000°C.

Spare pin for deep hole markers.
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces, but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, can withstand high water pressure, e.g. when cut in stone and tile.

Lightly sharpened linden pencil, with medium hard lead (HB) for optimal performance on wood, plaster and other soft materials.

For permanent marking in hard-to-reach places and in deep holes such as consoles. Stainless steel telescopic tip.

Permanent marker with cut tip 1+4 mm. Very suitable for marking on cardboard, paper, plastic, glass, wood and metal etc. The pen body is made of environmentally friendly pp plastic. The hood has a practical clip that sits well in the pocket. Quick-drying ink that is water-resistant and fade-resistant. Odorless without the addition of Tuluol and Xylol. Cap-off ink, can be uncapped for days without drying. Refillable with Refillstation 640.
Schneider is EMAS certified.

Long green pencil with very hard lead (10 H), which is 10 times harder than the lead in normal carpenter's pencils. Mainly for use on concrete but can also be used on wood.

Tire chalk very suitable for marking on dry and wet tyres. Very good adhesion to almost all surfaces, even oily and rusty metal and wet wood. With paper over to keep fingers clean.

Grips up to ø 8.5 mm crayons. Square.

Depth marker with 2.8 mm thick graphite pin as standard. The tip is 40 mm long, you can easily get through brackets for e.g. screw holes. Also suitable as a replacement for the carpenter's pencil. Triangular shape means that it does not roll away. For marking on most surfaces/materials, e.g. smooth surfaces such as tiles, tiles and glass etc. Also adheres to dirty and oily surfaces. The pin is fed forward easily with a simple thumb grip. The sleeve is equipped with a reinforced belt clip for easy storage in trousers or a tool pocket. Pencil sharpener at the end of the pencil which is attached with a bayonet socket. Comes with a graphite pencil.
Spare pencil:
Dry Graphite: Hardness level 2B, a little softer than a standard hard carpenter's pencil, and thus adheres better to more surfaces. Wipeable.
Dry Graphite H: Graphite pencils especially suitable for marking wood and slightly harder than standard Graphite 2B pencils. Wipeable.
Dry Basic: Water-soluble stick that is easily wiped off. Yellow pen is excellent for marking on dark surfaces. Yellow and red pin also adheres to dirty and oily surfaces but are sensitive to heat as they can become soft.
Dry Special: Permanent pin, so-called water jet resistant, withstands high water pressure, e.g. when cut in stone and tile.

Merkekritt

Felt-tip pens fitted with an aluminum sleeve. For labeling and texting. Waterproof and quick drying. Sticks to most substrates such as paper, cardboard, glass, porcelain, etc. Free from xylene.
Artline 70. With round, fine tip 1.5 mm.
Artline 90 . With cut tip width 2-5 mm.

Marking pen for deep, hard-to-reach holes. Ideal for marking e.g. boreholes. 30mm long and 2.8mm round tip. Permanent and waterproof ink. Sticks to most surfaces. Xylene Free, almost odorless. Refillable. Aluminum sleeve.

Quick-drying marker pen for permanent marking in harsh conditions. The paint has excellent adhesion and sticks to the vast majority of substrates. Excellent coverage. Waterproof.

Marker pen with a covering varnish finish and gives an even result on many different surfaces. Permanent pigment ink that withstands water, high wear and temperatures up to 400°C. Thin round nib with 1-2 mm line width and is suitable for precise and accurate writing. Gives a covering result and has a long durability, especially on soft, porous and dark surfaces. Can be used on many different surfaces, for example plastic, metal, glass and wood. The ink contains neither xylene nor toluene, which means that the marker pen does not emit any strong smells. Aluminum pen body.

Marker pen with ball in the marker that ensures the right amount of color flows down to the tip for sharp and clear lines. Can be used on pipes, aluminium, PVC, steel, stainless steel, concrete and rubber. Adheres to greasy, dirty or uneven surfaces with temperatures from -10° up to +145°. Works on dark surfaces where traditional markers would not be visible. Dries in 10 seconds. Water and UV resistant. The marking lasts up to 6 months. Metal body. Xylene-free paint.

Permanent universal markers for plastic, glass, metal, etc. Odorless Cap-off ink without Toluene and Xylene. Dries quickly. The hood has a practical clip. UV resistant.
Round tip 0.4 mm.

For painting. With folded long sides for assembly.
S = Number set. 15 templates with 1 of each 0-9, hyphen, period, extra zero and 2 end pieces.
B = Letter set. 36 stencils with one of each A-Z, hyphen, comma, full stop, & sign, middle piece and 2 end pieces.
Marking stencils are sold in complete sets only.

Spare pins in smart container of 10 pins for marking on all types of surfaces. Can be attached to a pocket or tool bag with a clip. The design of the container protects the pins during transport and only ejects one pin at a time. Available in two combinations; 10 pins in durable graphite or 4 graphite pins and 6 chalk pins, 3 red and 3 yellow. Fits Hultafors ballpoint pen.

Spare pin for Pica BIG Dry. The pins are water-soluble and can be used on many types of surfaces, even dirty and oily ones. Should be kept cool.

Carpenter's pencil with a 2x5 mm rectangular, replaceable graphite lead. Can be used on many types of materials, even dirty and oily. On the leading edge of the pen there is a sandpaper suitable for sharpening the pin. Supplied in a holster with belt clip.

TALLSETT 3404